R. R. Veeravalli, R. Nallu, and S. M. M. Mohiuddin, “Mechanical and tribological properties of AA7075-TiC metal matrix composites under heat treated (T6) and cast conditions,” Journal of Materials research and Technology, vol. 5, pp. 377-383, 2016.
V. Umasankar, M. A. Xavior, and S. Karthikeyan, “Experimental evaluation of the influence of processing parameters on the mechanical properties of SiC particle reinforced AA6061 aluminium alloy matrix composite by powder processing,” Journal of Alloys and Compounds, vol. 582, pp. 380-386, 2014.
J. P. Davim, Metal Matrix Composites: Materials, Manufacturing and Engineering. Berlin, Germany: De Gruyter, 2014.
O. E. Falodun, S. R. Oke, F. V. Adams, S. O. Akinwamide, O. O. Ige, T. Tshephe, and P. A. Olubambi, “Fabrication and microstructural characterization of nanoparticle tin reinforced al-mg-si matrix composite,” Materials Today: Proceedings, vol. 18, pp. 3209-3217, 2019, doi: 10.1016/j. matpr.2019.07.197.
S. O. Akinwamide, S. M. Lemika, B. A. Obadele, O. J. Akinribide, O. E. Falodun, P. A. Olubambi, and B. T. Abe, “A nanoindentation study on Al (TiFe-Mg-SiC) composites fabricated via stir casting,” Key Engineering Materials, vol. 821, pp. 81-88, 2019.
A. Hamdollahzadeh, M. Bahrami, M. F. Nikoo, A. Yusefi, M. K. B. Givi, and N. Parvin, “Microstructure evolutions and mechanical properties of nano-SiC-fortified AA7075 friction stir weldment: The role of second pass processing,” Journal of Manufacturing Processes, vol. 20, pp. 367-373, 2015.
A. Thangarasu, N. Murugan, and I. Dinaharan, “Production and wear characterization of AA6082-TiC surface composites by friction stir processing,” Procedia Engineering, vol. 97, pp. 590-597, 2014.
N. Yuvaraj and S. Aravindan, “Fabrication of Al5083/B4C surface composite by friction stir processing and its tribological characterization,” Journal of Materials Research and Technology, vol. 4, pp. 398-410, 2015.
V. Chak, H. Chattopadhyay, and T. L. Dora, “A review on fabrication methods, reinforcements and mechanical properties of aluminum matrix composites,” Journal of Manufacturing Processes, vol. 56, pp. 1059-1074, 2020.
J. Hashim, L. Looney, and M. S. J. Hashmi, “The enhancement of wettability of SiC particles in cast aluminium matrix composites,” Journal of Materials Processing Technology, vol. 119, pp. 329-335, 2001.
M. R. Ghomashchi and A. Vikhrov, “Squeeze casting: An overview,” Journal of Materials Processing Technology, vol. 101, pp. 1-9, 2000.
Z. Yuan, W. Tian, F. Li, Q. Fu, X. Wang, W. Qian, and W. An, “Effect of heat treatment on the interface of high-entropy alloy particles reinforced aluminum matrix composites,” Journal of Alloys and Compounds, vol. 822, p. 153658, 2020.
W. Zhang and G. S. Frankel, “Transitions between pitting and intergranular corrosion in AA2024,” Electrochimica Acta, vol. 48, pp. 1193-1210, 2003.
T.-S. Huang and G. S. Frankel, “Influence of grain structure on anisotropic localised corrosion kinetics of AA7xxx-T6 alloys,” Corrosion Engineering, Science and Technology, vol. 41, pp. 192-199, 2006.
D. K. Xu, N. Birbilis, D. Lashansky, P. A. Rometsch, and B. C. Muddle, “Effect of solution treatment on the corrosion behaviour of aluminium alloy AA7150: Optimisation for corrosion resistance,” Corrosion Science, vol. 53, pp. 217-225, 2011.
M. Sravanthi and K. G. Manjunatha, “Corrosion Studies of As Casted and Heat Treated Aluminium-7075 Composites,” Materials Today: Proceedings, vol. 5, pp. 22581-22594, 2018.
R. T. Loto, “Investigation of the influence of SiC content and particle size variation on the corrosion resistance of Al-SiC matrix composite in neutral chloride solution,” The International Journal of Advanced Manufacturing Technology, vol. 101, pp. 2407-2413, 2019.
E. S. Rao and N. Ramanaiah, “Influence of heat treatment on mechanical and corrosion properties of aluminium metal matrix composites (AA 6061 reinforced with MoS2),” Materials Today: Proceedings, vol. 4, pp. 11270-11278, 2017.
K. K. Alaneme and M. O. Bodunrin, “Corrosion behavior of alumina reinforced aluminium (6063) metal matrix composites,” Journal of Minerals and Materials Characterization and Engineering, vol. 10, pp. 1153-1165, 2011.
S. O. Akinwamide, O. J. Akinribide, and P. A. Olubambi, “Influence of ferrotitanium and silicon carbide addition on structural modification, nanohardness and corrosion behaviour of stir-cast aluminium matrix composites,” Silicon, vol. 13, pp. 2221-2232, 2021.
M. K. Srinath, J. Nagendra, K. D. Bopanna, S. S. Swamy, and M. Ravikumar, “Corrosion performance characteristics of heat treated Al-6082 with nano-SiC reinforcements,” Materials Letters, vol. 322, p. 132512, 2022.
L. Purushothaman and P. Balakrishnan, “Wear and corrosion behavior of coconut shell ash (CSA) reinforced Al6061 metal matrix composites,” Materials Testing, vol. 62, pp. 77-84, 2020.
B. Vinod, S. Ramanathan, V. Ananthi, and N. Selvakumar, “Fabrication and characterization of organic and in-organic reinforced A356 aluminium matrix hybrid composite by improved double-stir casting,” Silicon, vol. 11, pp. 817-829, 2019.
A. A. Adediran and M. Sriariyanun, “Applicability of Agro-Waste Materials in the Development of Aluminium Matrix Composites for Transport Structures,” Applied Science and Engineering Progress, vol. 16, p. 6634, 2023.
S. Roseline and V. Paramasivam, “Corrosion behaviour of heat treated Aluminium Metal Matrix composites reinforced with Fused Zirconia Alumina 40,” Journal of Alloys and Compounds, vol. 40, pp. 205-215, 2019.
S. Kumar, A. Kumar, and C. Vanitha, “Corrosion behaviour of Al 7075/TiC composites processed through friction stir processing,” Materials Today: Proceedings, vol. 15, pp. 21-29. 2019.
M. Belkhaouda, L. Bazzi, R. Salghi, O. Jbara, A. Benlhachmi, B. Hammouti, and J. Douglad, “Effect of the heat treatment on the behaviour of the corrosion and passivation of 3003 aluminium alloy in synthetic solution,” Journal of Materials and Environmental Science, vol. 1, pp. 25-33, 2010.
H. C. A. Murthy, V. B. Raju, and C. Shivakumara, “Effect of TiN particulate reinforcement on corrosive behaviour of aluminium 6061 composites in chloride medium,” Bulletin of Materials Science, vol. 36, pp. 1057-1066, 2013.
K. K. Alaneme and P. A. Olubambi, “Corrosion and wear behaviour of rice husk ash—Alumina reinforced Al-Mg-Si alloy matrix hybrid composites,” Journal of Materials Research and Technology, vol. 2, pp. 188-194, 2013.
R. T. Loto and P. Babalola, “Effect of alumina nano-particle size and weight content on the corrosion resistance of AA1070 aluminum in chloride/sulphate solution,” Results in Physics, vol. 10, pp. 731-737, 2018.
S. Suresh, G. H. Gowd, and M. L. S. Devakumar, “Corrosion behaviour of Al 7075/Al2O3/SiC MMNCs by weight loss method,” Journal of Bio-and Tribo-Corrosion, vol. 4, pp. 1-6, 2018.
L. H. Hihara and R. M. Latanision, “Corrosion of metal matrix composites,” International Materials Reviews, vol. 39, pp. 245-264, 2018.
T. Croucher, “Quenching of aluminum alloys: what this key step accomplishes,” Heat Treating, vol. 14, pp. 20-21, 1982.
